Durafix Easyweld Aluminium Welding , Brazing & Soldering 1 Stick Kit Dura fix

Sold See similar items £7.80 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: chronos_ltd_engineering_supplies ✉️ (192,115) 100%, Location: Dunstable, GB, Ships to: AMERICAS, EUROPE, AU, Item: 331242074139 Durafix Easyweld Aluminium Welding , Brazing & Soldering 1 Stick Kit Dura fix.
Durafix Easyweld Aluminium Welding , Brazing & Soldering 1 Rod Kit With Brush  

 

 

 

Durafix Aluminium Welding Brazing & Soldering Rods from Chronos  

 

 

Chronos are pleased to announce we now stock the superb 

DURAFIX ALUMINIUM WELDING BRAZING & SOLDERING RANGE.

 

  T HIS SALE IS FOR A ONE ROD SET - THIS PICTURE IS FOR THE 60 PC SET- 

WE ALSO TO 5  10  & 20 ROD SETS SEE LISTINGS

Durafix aluminium welding  rods are used to repair Aluminium, Al-alloys, Zinc, Pot metals, Die-cast and Kirksite dies. In fact you can use it on almost any non-ferrous metal, except stainless steel. You can use Durafix on dissimiliar metals (copper to aluminium) and even galvanized steel.

This revolutionary product designed specifically for aluminium welding, uses no flux, making it easy to use and environmentally safe. A low working temperature of 732° F (392° C).

Durafix is the easiest method of welding aluminium and is ideal for use on all types of repairs. Large or small the rod can help you make a professional, inexpensive and durable weld.

 

“Durafix Easyweld  carries a 100% guarantee. If you are not entirely satisfied, please return the product in its original packaging and we will refund your money. No questions asked!”

There is no need for expensive equipment. No need for years of welding experience. It’s convenient and can be used by both  novice and professional alike.   Durafix is the most widely used rod on the market for aluminium welding, welding zinc based metals – white – die cast and pot metals.

Welds made with the rod are clean and free from slag, and produces a sound joint which is stronger than the parent metal.  With Durafix rods you can now do aluminium welding which were previously too difficult or uneconomic.

Aluminium boat repair was often impractical because of the very thin guage aluminium used in boat hulls. Now aluminium skins of almost any thickness can be welded successfully, easily and cheaply.

Durafix can be applied with any handheld torch – Oxyacetylene, Mapp, Propane or Butane. The Durafix rod is an essential product for the D.I.Y enthusiast and a valued addition to the professional workshop for aluminium welding.

The Advantages of  Durafix!
  • There is no need for expensive equipment.
  • No need for years of welding experience.
  • It’s convenient and can be used by both  novice and professional alike.
  • Welds are clean and free from slag, and stronger than the parent metal.
  • You can now repair aluminium, previously too difficult or uneconomic.
  • Durafix can be applied with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane.
  • Durafix works on most aluminium, zinc, copper, brass, pot-metal and die-cast aluminium.

The Dis-advantages of  Durafix!
  • Durafix will not work on any ferrous metals – except galvanized steel.
  • Durafix will not work on Stainless steel, 2000 grade or Renthal T6 aluminium.
  • Durafix will not work on lead, mazac, zamac, tin or pewter.

 


 

 

 

Product Applications

Durafix Easyweld will work with propane, butane, mapp, oxyacetylene or any fuel source as long as the material is brought up to 389´C ( 732´F ) before applying the rod.The material must be cleaned with a stainless steel brush only.

Unlike conventional aluminium welding techniques, brazing with Durafix Easyweld is very simple. There is only one rod type, which works on all grades and alloys of aluminium.

You do not need to identify the specific alloy or choose a brazing filler to match. All you need are the parts to be repaired, the Durafix Easyweld rods and a heat source. Just follow these four steps for a perfect brazed repair.

PreparationBrush surface of the part to be repaired thoroughly under heat to break up the surface coating of aluminium oxide.
HeatingHeat the aluminium parts hot enough for the rod to flow without the aid of the flame, thoroughly tinning the surface.To test for the correct temperature, rub the end of a rod onto the work surface while heating, the rod will flow when working temperature is reached.  
Tinning Brush tinned surface under heat, thoroughly filling the open pores. This creates a film of rod over the weld or repair area, which aids bonding and strength to the weld.  
Filling With sides thoroughly tinned, flow in enough rod to fill the vee. Be sure filler fuses with the tinned surface without melting the aluminium.  
Leaky radiators spell trouble both for the effecient running of your vehicle and the environmental damage. Constantly filling up the coolant in your car’s radiator, creates the risk of it overheating and the coolant you leak can cause environmental damage. Your cooling system will also become damaged with the fluctuating coolant levels.A radiator is a very fragile piece of equipment, usually made from very thin gauge aluminium with either plastic sides or aluminium. Anything that hits it can easily puncture it and cause a leak.

With metal tanks, repairing any damage is very difficult and often costs more than a replacement unit. Well not any more!

Durafix Easyweld can help you repair the damage in a few seconds, with minimal fuss. Using a handheld torch, heat the damage area – REMEMBER – this is very thin gauge aluminium, it will get to working teperature in a few seconds. Apply the heat and rub the end of a rod onto the damaged area, almost immediately the rod will flow. Simply go over the damaged area and take the heat away. It will be cool in a few minutes, with your hole effectively fixed. When its cool fill with water and test again.

Because the rods don’t drip like conventional solder, going over the holes won’t cause blokages in the pipes, so the radiator will be as good as new, and for the cost of a few cents and a few minutes of your time, you have a perfectly working radiator.

The same is applicable for fixing cooling units, condensors, and air-conditioning units.

Durafix Easyweld rods work on any non-ferrous metals, except stainless steel.  Suitable for aluminium welding, die-cast, zinc, copper and  brass. You can join these dissimiliar metals together. They will even work on galvanized steel.

This is a very versatile product and a valuable addition to any toolbox and workshop. You can use Durafix Easyweld with any open flame torch.

How to Weld Zinc Alloy and Zinc-based Die-cast Metals

 

PreparationVee the broken edges of the zinc alloy to about 45 degrees, clean the surface of any plating or scale back from edges of the vee 1/8 of an inch.
Heating Heat until it starts to flow. Turn flame parallel to surface and with side of flame, hold at this heat. Heat welding rod to same temperature.Now with both bases and welding rod at this temperature, touch rod to the break and rod will flow into vee, thoroughly fusing the parts.
RepairingRepeat operation until break is completely filled. Any eccess can be ground and polished after cooling.Be sure to kick rod into weld to break down skin resistance as the filler rod will lay on surface and will not fuse if only heat is applied.

Replacement parts are expensive as are repairs, not to mention time consuming. It is also difficult to do repairs in the open with conventional welding equipment…………not any longer.Durafix Easyweld is the alternative. Small, versatile and easy to use, you can repair parts on the water, or in the field. All you need is Durafix Easyweld and a handheld torch!

How to repair a propeller

PreperationGrind the damaged part of the blade to remove any sharp edges and paint.

Now brush the damaged area throughly with the stainless steel brush, to break up surface oxide and remove paint.

HeatingHeat the blade hot enough to flow the rod without the aid of the flame.

Tin the flat (not bevelled) side and attach a temporary support of stainless steel or iron. Turn and tin the bevelled side.

Building the bladeBuild out the blade slightly larger than its original size. Leave it to cool naturally. When it cools, the stainless or iron support will simply fall away.

Now grind damaged edges to a 45 bevel. Pitch propeller to standards.

The ResultsLet cool, then grind to proper standards.

Results? … a well prepared wheel without porosity ready for you to balance and paint!

 

Technical Specifications

Durafix Easyweld is a unique 3 in 1 application. Brazing, Soldering or Welding Aluminium is now as easy as 1-2-3. There is no need for expensive equipment. No need for years of welding experience. It’s convenient and can be used by both novice and professional alike.

Durafix Easyweld is the most widely used rod on the market for welding zinc based metals – white – die cast – pot metals. Welds made with the rod are clean and free from slag, and produces a sound joint which is stronger than the parent metal.

Welding aluminium without the use of flux, produces a joint sound and free from porosity. Durafix Easyweld will work on galvanised steel, also used as a Rub-on solder. Use a slightly carbonized flame (excess of acetylene), with small tip for most work.

Durafix Easyweld carries the following classifications:
  • ASTM no. B240
  • US Army – Engineering Corp – Spec no. MIL-R-4208
MELTING POINT 389´C ( 732´F )

Technical Specifications in Imperial:

Tensile strength, lbs/sq. in. 47, 000
Compression strength, lbs/sq. in. 60, 000 – 75,000
Shear strength, lbs/sq. in. 34,000
Charpy Impact strength, lbs/sq. in. 4ft/lb to break 1/4´´ bar
Hardness ( Brinell ) 100
Ductility Good Good
Melting Point 732°F
Specific Gravity 6.7
Density (lbs/cu. in.) 0.25
Elongation (in 2´´) 3%
Coefficient of Linear Expansion 15.4×10-6/°F
Electrical Conductivity 24.9% of CU
Thermal Conductivity 0.24 cal/cu. cm/°C

Technical Specifications in Metric:

Tensile Strength, kg/sq. cm 3304
Compression Strength, kg/sq. cm 4200 – 5250
Shear Strength, kg/sq. cm 2390
Charpy Impact Strength kg/sq. cm 0.52 kg/m to break 0.635cm bar
Hardness (Brinell) 100
Ductility good Good
Melting Point 389` C
Specific Gravity 6.7
Density 6.92 g/cu. cm
Elongation (in 5cm) 3%
Coefficient of Linear Expansion 15.4*10-6/~F
Electrical Conductivity 24.9% of Copper
Thermal Conductivity 0.24 cal/cu. cm/~C

 

 

Payment

We accept payment by Paypal , Visa or Mastercard.

We aim to ship within 1/2 working days of payment . If your order is more urgent please call us and we will do our best to expedite your purchase.

We have been supplying Engineering tools Mail Order for 30 Years , a family business , we started from a small converted garage in St Albans and have grown steadily over the years and are now operating from our new 10,000 square foot warehouse in Dunstable . Mail order is still our speciality , sending several hundred orders per day to our satisfied customers around the world , Although most of our business comes via our 8 Tooling Websites and Ebay - we also welcome personal callers to browse our thousands of products at our showroom / warehouse in Dunstable- We are open Monday - Friday 8AM - 4PM and Saturdays 9AM - 12PM . A word od warning though - we occasionaly close if we are attending an exhibition or if a large import shipment is being delivered so if you are travelling a long way PLEASE call ahead to check We can be found at -

CHRONOS LIMITED

UNIT 2 SOUTHFIELDS ROAD

DUNSTABLE

BEDS

LU6 3EJ

---

---------------

---

 

 

Track Page Views With Auctiva's FREE Counter

  • Condition: New

PicClick Insights - Durafix Easyweld Aluminium Welding , Brazing & Soldering 1 Stick Kit Dura fix PicClick Exclusive

  •  Popularity - 62 watchers, 0.0 new watchers per day, 1,277 days for sale on eBay. Super high amount watching. 166 sold, 10 available.
  •  Best Price -
  •  Seller - 192,115+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive