Seller:pilgrim18✉️(15,046)0%,
Location:Worthing, GB,
Ships to: AMERICAS, EUROPE, ASIA, AU,
Item:381926440708CAMERA LIGHT SEAL REPLACEMENT SELECTION.
new light seal kit
CAMERA LIGHT
SEAL SELECTION PACK
The
replacement light seal
kit comprises various foam strips each 200mm x 40mm (approx 8 x 1.5
inches)
with the exception of the 1.5mm and 2mm self adhesive open cell foams
which are
200mm x 25mm (approx 8 x 1 inches) . The various types of foam give a
broad
range of uses and are as listed below
There
are 15 strips in all plus cutting hints and single sided
blade .
1. 3mm and 5mm open
cell
foam non adhesive.
This is the standard light seal used by most camera manufacturers.
Various types of closed cell
foam are used for the replacement of mirror cushions in many older
cameras
2. 3mm and 5mm open
cell
foam self adhesive
This is the standard
light seal used by most camera manufacturers.
The
light seal on this camera has crumbled away making the camera useless
but is easily and cheaply replaced by the open cell foam
3. 1mm and 2mm semi
open
cell non adhesive.
This foam is a cross
between and closed cell foams.
being slightly more
dense than the open cell
but not as dense as closed cell
This
shows the deterioration of the foam packing holding the prism in a SLR
camera.The sightest touch of the scewdrivermakes the old rotten foam
fall away.If this is not replaced the prism will become mis-aligned and
rattle.
4. 1mm and 2mm semi
open
cell self adhesive
This foam is a cross
between and closed cell foams.
being slightly more
dense than the open cell but not as dense as the closed cell
The
shutter and prism seating also require a foam damper which rots away after time and will need to be
replaced.
4. 1.5mm and 2mm
closed
cell foam non adhesive
A more dense foam that is useful when a slightly firmer material is
required for light seal or mirror cushion replacement. Easily cut and
shaped
It
is important to ensure that the film view window seal is intact as this
is a common cause of film fogging It
is important to ensure that the film view window seal is intact as this
is a common cause of film fogging
5. 1.5mm and 2mm
closed
cell foam self adhesive
A more dense foam that is useful when a slightly firmer material is
required for light seal or mirror cushion replacement. Easily cut and
shaped
Various types of closed cell
foam are used for the replacement of mirror cushions in many older
cameras
6. 1mm and 2mm open
cell
foam self adhesive only
The grroves to the film
door require light seal which can be cut from the 1mm or 2mm foams.
However, if you are unhappy about cutting your own strips then various
sizes of laser cut strips for this purpose are available in my ebay shop
7. 1mm felt self
adhesive
only
TYPICAL SECTION THROUGH OPEN CELL FOAM
TYPICAL SECTION THROUGH CLOSED CELL FOAM
A full selection of
individual foam sheets and packs are available from my eBay shop
Condition:New
Type:Light Baffle
Brand:Unbranded/Generic
Country/Region of Manufacture:Unknown
PicClick Insights - Camera Light Seal Replacement Selection PicClick Exclusive
Popularity - 32 watchers, 0.1 new watchers per day, 253 days for sale on eBay. Super high amount watching. 125 sold, 10 available.
Popularity - Camera Light Seal Replacement Selection
32 watchers, 0.1 new watchers per day, 253 days for sale on eBay. Super high amount watching. 125 sold, 10 available.
Best Price -
Price - Camera Light Seal Replacement Selection
Seller - 15,046+ items sold. 0% negative feedback. Good seller with good positive feedback and good amount of ratings.
Seller - Camera Light Seal Replacement Selection
15,046+ items sold. 0% negative feedback. Good seller with good positive feedback and good amount of ratings.