Bilt Hamber Auto Balm Superior Gloss 250ml - FREE App Pad & MF Cloth.
- Visit Shop
- About Us
- Feedback
- Add To Favourites
Contact Us
We have the parts you need
Bilt Hamber Auto Balm Superior Gloss 250ml - FREE App Pad & MF Cloth
-
-
-
-
-
- View Motor Bling Feedback
Bilt Hamber Auto balm Superior Gloss 250ml Auto-balm is a unique product providing protection and gloss to
automotive paintwork, car bodywork, chrome and metal surfaces. "Protect
your car by making it shiny!" It's the result of thousands of hours of development and testing - a
blend of synthesised complex corrosion inhibiting molecules that lock
together tightly enabling them to remain functional in ultra-thin,
high-gloss films. auto-balm will seal capillary pores in paintwork and
provide an anti corrosion barrier to stone-chips and other damaged sites
on vehicle paintwork.
auto-balm will also protect and shine chrome, aluminium, and alloys.
auto-balm is not an abrasive polish - if the vehicle's bodywork is faded
or in poor condition then the use of cleanser-polish will be required
before application. Key Points -
Higher protection than any other wax, polish or sealer
- Produces an exceptional deep gloss finish
- Suitable for all automotive paint finishes plus aluminium, alloys and other metals too
- Fills swirl marks for a crystal clear appearance
- Produces absolutely no dust or powder on buffing
- Prevents corrosion spreading from stone chipped and damaged paint sites
- auto-balm’s deep gloss protective shine is achieved with no chemical build-up whatsoever
How To Use
auto-balm should not be used without following these instructions.
Thoroughly wash vehicle with hot soapy water, only use salt-free
automotive shampoos. Do not use wash and wax products. Dry vehicle,
using chamois leather or synthetic equivalent.
auto-balm is not an abrasive polish, if your paintwork is faded,
feels rough or has not been polished for a long period it will be
necessary to use cleanser-polish and/or auto-clay before application.
Once prepared in this way regular application of auto-balm will maintain
a high gloss finish without need for further use of abrasive polishes.
Wet the supplied app-pad under running cold water. Wring the pad out -
it should retain a damp feel. Touch the surface of the auto-balm paste
so that a very small amount of the material is transferred to the pad.
Apply to the vehicle keeping the pad flat - the dampness retained in the
pad will lubricate the surface and allow the small amount of paste to
spread a long way. You should not see droplets of water as you apply
autobalm if you do then the pad is too wet.
Apply sparingly using the applicator pad in circular motion. (If
preparation of car to show-standard or swirl mark elimination is
required see below note*). If the paint is in marginal condition apply
increased amounts of auto-balm and increase application pressure using
smaller circular motion this will fill the porous surface and improve
gloss although there is a point where if the paint does not respond use
cleanser-polish first.
Work on small areas, ONLY 2 - 3 feet square, at a time, do not work
in direct sunlight and apply only to cool panels. Most polishes are
laden with abrasive material making them easy to use but wearing to
paint films and dusty upon buffing leaving little or no protective film
at all. Remember that unlike other polishes auto-balm is not simply
removed when buffed - applying small amount evenly will enable easy
buffing and great results.
After application of auto-balm wait for a few moments before buffing
to a high uniform shine. It may be noticed on paintwork in poor
condition that the wet-look created by a buffed auto-balm film is not
fully uniform - this condition will improve on repeat application as the
capillary pores fill with the protective film re-establishing a smooth
surface.
Ensure that the polish applicator pad remains clean during
application - if required wash it using vehicle shampoo, rinse it
thoroughly and squeeze until damp before continuing. A damp pad is not
necessary when applying to metals.
The buffing cloth should be turned frequently during use.
*Where preparation of the vehicle to the finest possible degree is
desired the application of auto-balm using light, straight, forward and
back technique will eliminate any swirls or microscopic cobweb-like
lines. On top panels, use front-to-back hand motions. On side panels,
use up-and-down hand motions. This method allows autobalm to fill tiny
scratches and improve reflectivity. Heavy rubbing is not necessary.
Swirls and cob webbing caused by abrasive polishes and waxes are
particularly noticeable on the sides of clean vehicles in direct
sunlight - you will be amazed at the elimination of these imperfections
by applying Auto-balm using this technique.
T
Always in stock for FAST Postage
Engine Bay Products
Browse Stock
Dump Valves
Browse Stock
EBC Discs & Pads
Browse Stock
About Us
We are a family run business started back in 2004 offering car customising and performance products from top brands such as Forge, K&N, Bailey, Wossner, Walbro, Gaz, The Loudest and many more.
We also have products manufactured for ourselves and these are made to the highest standards. Buying from us means you buy directly from the importer, so are prices are always the best.
Over the past 9 years here at Motorbling we have also expanded our product range into standard replacement parts such as Brakes Pads from EBC and Wing Mirrors from Lucas, so we can now offer everything you need, from customising, to performance to standard replacement parts for MOT'S and general repairs.
We offer fantastic service and discounted prices so why shop anywhere else.
Shipping Information
All items have a shipping and processing timeframe in the listings, so please read this section to get an idea of how long your products will take to reach you.
All products are shipped with tracking and insurance, so in the event of loss or damage, your purchase is totally covered (simply e-mail us through eBay messages to let us know the item has arrived damaged or has not arrived)
We will notify you by e-mail when the item has been shipped, so there is no need to contact us.
If an item does not arrive within 7 days of receiving the despatch e-mail (please allow up to 14 days if buying from Europe or the Rest of The World) then feel free to contact us through eBay messages so we can assist you with this.
Please remember when leaving feedback and seller star scores you are judging us on dispatch time and not the postal company used.
Returns Policy
30 Days Returns Guarantee If we have made a mistake, please contact us so we can resolve the issue immediately. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit. If you think we’ve sent you the wrong item or size, please double check the full description in the listing, including the UK size before requesting a return. If you have incorrectly ordered the wrong item we can exchange the item subject to stock availability, however additional postage charges will apply. To request a return please submit the request using the contact us form/ Site Returns process. Our returns address will be provided. To request an exchange please contact us through our contact page. Thank you.
Have a Question? Get in touch!
Add To Favourite Sellers
- Engine Bay Products
- Forged Pistons
- Fuel Hose & Fittings
- Remus Exhausts
- Power Boost Valves
Visit Shop!