Amazing Mold Putty 2/3 lb kit (300g) - Mould making Silicone Putty

FDA compliant mold putty is non toxic and the best product for making quick simple flexible rubber molds for resin, plaster, polymer clay, wax, chocolate, soap, and much more. (2/3 lb. kit available under Starter Kits.) (2/3 lb is about 300g) This mould making putty is non-toxic and complies with FDA 21 CFR 177.2600. This makes it suitable for contact with food.   If you are using this for food/candy/ice application, do not use it with any other material prior to the intended use.Can be washed with soap and water. With an easy mixing ratio of 1:1 this mould putty gives you 3 minutes of working time (To mix and apply)  and can be demoulded in 20-25 minutes. Mix Ratio: 1 to 1 (equal amounts of the A & B side by weight or volume). Open Time: 3 Minutes - amount of time allowed to mix and form the putty over your item before the material begins to harden. Warm temperatures decrease open time. Demould Time: 20-25 minutes - Based on mass and temperature (the time at which you are able to remove the mold putty from your original item). Note: The thinner the mould, the more flexible it will be to help you remove parts with undercuts.

Cured Mold Putty: 1) The Amazing Mold Putty can be used for multiple castings from the same mould. 2) If using the mould for food products for consumption, do not use the mould for any other purpose to prevent contamination and make sure to wash the mould with soap and water before using it for food applications. 3) Mould life depends on the complexity of the part you are moulding, what material you are pouring, the thickness of the wall you make in your mould, and how delicately you handle your mould. 4) Your mould made with Amazing Mold Putty will withstand an operating temperature of 395 degrees F.