HPE 12Gb SAS Mixed Use (MU) SSDs are ideal for big data analytics, cloud computing, high performance compute, database applications and virtualization.
Achieve higher IOPS and lower latency to enhance the performance of your data center.
Maintain data accuracy with full data-path error detection and surprise power loss protection.
Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.
Self-encrypting FIPS Drive
Next Generation of SAS interface, based on the SAS-4 specification.
HPE 24Gb Enterprise SAS capability relies on a complete ecosystem enablement requiring a 24G SAS controller and updated server infrastructure which is set to launch in 2021.
HPE 24Gb Enterprise SAS SSDs are compatible with 12Gb Enterprise SAS ecosystem.
1 HPE Specified Testing: Over 3M hour test quant, derived from a combination of drive qualification test plans, specifically HDDQ spec-supplier responsibility to perform, HDDQ spec-HPE responsibility to perform, Reliability Demonstration Test (RDT) spec, CSI integration test spec, and Pilot test requirements. Tests were conducted in June 2020.
Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other third-party trademark(s) is/are property of their respective owner(s).
Full Specification :Brand: HPE
MPN: P49047-B21
Option Part Number: P49047-B21
Spare Part Number: P49745-001
Device Type: Solid State Drive - Hot-Swap
Capacity: 800 GB
Form Factor: 2.5 inch SFF
Interface: SAS 24Gbps
NAND Flash Memory Type: Triple-level cell (TLC)
Plug Type: Hot Pluggable
Connectivity Type: Dual
Carrier Type: Basic Carrier (BC)
Workload Type: Mixed Use
Bundled with: HPE Basic Carrier (BC)
Features: Digitally Signed Firmware (DS)
Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
Height: 15.00 mm
30 Days Writes (TB): 4380
Endurance DWPD (Drive Writes Per Day): 3
Drive Transfer Rate: 24 Gbps (external)
MAX Seq. Reads Throughput (MiB/s): 1090
MAX Seq. Writes Throughput (MiB/s): 1040
Random Read Average Latency uSec (4KiB,Q1): 94
Random Write Average Latency uSec (4KiB,Q1): 34
Random Read IOPS (4KiB, Q=16): 124000
Random Write IOPS (4KiB, Q=16): 118000
MAX Random Read IOPS (4KiB): 174000@Q64
MAX Random Write IOPS (4KiB): 120000@Q16
Interfaces: 1 x SAS 24 Gb/s
Compatible Bay: 2.5" SFF
Idle Time: 4.66 Watt
Random Read: 6.47 Watt
Random Write: 6.47 Watt
Sequential Read: 8.28 Watt
Sequential Write: 8.56 Watt
Random Read/Write: 6.47 Watt
MAX: 8.56 Watt
Designed for
HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch)
HPE ProLiant ML Series: ML30 Gen10 Plus (2.5inch), ML30 Gen10 Plus Entry (2.5inch), ML30 Gen10 Plus Performance (2.5inch)
HPE SimpliVity 325 Gen10 Plus V2 Node (2.5inch)